Q: Will Easy Clean really remove yellow waterline staining? I have heard these claims before.
A: Yes, Easy Clean was designed specifically to remove this type of staining.
Q: In the past I had to wet and dry the hull to remove yellow staining. How does easy Clean work?
A: Easy Clean works by entering the microscopic pores in the gelcoat and removing the bacteria which causes discolouring.
Q: I have black engine exhaust stains on my boat, will Easy Clean remove this?
A: Yes, as with yellow staining, exhaust staining will also be removed.
Q: Is Easy Clean a polish as well as a cleaner?
A: No, Easy Clean is a deep intensive cleaner.
Q: Is Easy Clean really that easy to use?
A: Yes, just spray it on, leave for 15 minutes and then wash off with a sponge or cloth using plenty of water.
Q: Do I need to use a special type of polish after the application of Easy Clean?
A: No, polish your boat with your preferred polish.
Q: Do I have to spray Easy Clean on?
A: Easy Clean can be applied by bush, or spray, whichever is more suited to your needs.
Q: Is Easy Clean temperature sensitive?
A: Easy Clean can be used in temperatures under 10 degrees centigrade, however it is advisable in this circumstance to leave the product on the gelcoat for a longer period of time. Do not allow Easy Clean to freeze.
Q: I have black rubber/tyre marking on my hull, will Easy Clean remove this?
A: Yes, although depending on the severity of the marking you may need to make a second application.
Q: Will Easy Clean remove rust staining?
A: Yes, Easy Clean is particularly good at cleaning up stainless steel and anchor rust staining on hulls.
Q: I have non-slip decks, can I use Easy Clean on them?
A: Yes, apply Easy Clean in the normal manner and sluice with plenty of water.